Stamets@lemmy.dbzer0.com to People Twitter@sh.itjust.works · 20 days agoJust a tiplemmy.dbzer0.comimagemessage-square95fedilinkarrow-up1721arrow-down18
arrow-up1713arrow-down1imageJust a tiplemmy.dbzer0.comStamets@lemmy.dbzer0.com to People Twitter@sh.itjust.works · 20 days agomessage-square95fedilink
minus-squarevillage604@adultswim.fanlinkfedilinkEnglisharrow-up16arrow-down2·20 days agoDo they mean tungsten? Because titanium is a relatively soft metal, with the alloys used for jewelry being like 20-40 on the Rockwell C scale. Mild steel is about in the same range.
minus-squareHikingVet@lemmy.calinkfedilinkarrow-up10·edit-220 days agoAnd other titanium alloys used in tooling or knives can be harder than W2 tool steel. IIRC nickel is a common metal it’s alloyed with and nickel is a bitch.
minus-squarevillage604@adultswim.fanlinkfedilinkEnglisharrow-up2·20 days agoRight, but those alloys aren’t typically used for rings and such.
minus-squareHikingVet@lemmy.calinkfedilinkarrow-up4·20 days agoI question the person’s knowledge of material science if they are making a cock ring out of any metal.
minus-squareI_Has_A_Hat@lemmy.worldlinkfedilinkarrow-up9·20 days agoTungsten actually isn’t too much of a problem. While it’s hard to cut, it’s easy to break.
Do they mean tungsten? Because titanium is a relatively soft metal, with the alloys used for jewelry being like 20-40 on the Rockwell C scale.
Mild steel is about in the same range.
And other titanium alloys used in tooling or knives can be harder than W2 tool steel. IIRC nickel is a common metal it’s alloyed with and nickel is a bitch.
Right, but those alloys aren’t typically used for rings and such.
I question the person’s knowledge of material science if they are making a cock ring out of any metal.
Tungsten actually isn’t too much of a problem. While it’s hard to cut, it’s easy to break.
Just smash his dick with the hammer!