… the pans are likely not “nontoxic” some independent testing and research suggests. Nor are they even “ceramic” – at least not in the way the public broadly thinks of ceramics. Now, regulators are investigating some of the pan sellers’ claims.
… the pans are likely not “nontoxic” some independent testing and research suggests. Nor are they even “ceramic” – at least not in the way the public broadly thinks of ceramics. Now, regulators are investigating some of the pan sellers’ claims.
Good luck finding an article on point for this sort of thing. I looked for a bit to try to find something to link here, but couldn’t find anything that directly addressed cooking oil polymers. I just wanted to say that you won’t necessarily be eating burnt fat. Seasoning cast iron/carbon steel isn’t necessarily about burning fat onto the surface of the pan, since what you’re trying to do is create a polymerized layer of cooking oil on the surface of the pan. Polymerization can occur well below the smoke point of an oil, you just apply heat to speed up the process. Applying too much heat can actually be counterproductive, since the polymer will carbonize, but you’ll probably never reach this point unintentionally without leaving a pan on the burner unattended. Under normal cooking conditions, any heat degradation of the polymer layer will be made up for with the fresh cooking oil that you’ve used, refreshing the seasoning. If you’re going to use cast iron or carbon steel, you should thoroughly clean any burnt on bits after cooking with dish soap. Modern dish soaps don’t have lye, so you won’t be doing any damage to the seasoning and you’ll only be left with polymerized oil, not burnt fat.
If you do decide to do more research and find something on point, please do share! I wasn’t able to find anything that explicitly pointed towards it being unhealthy, and I’m alright with making a somewhat informed assumption of the risk.