• InEnduringGrowStrong@sh.itjust.works
    link
    fedilink
    arrow-up
    9
    ·
    21 days ago

    Solar with batteries and stuff.
    Pavers in the backyard.

    I tend to do some things myself, so it’s not just about money but also about time and energy.
    Although, I guess, in a way that’s still about money since I could hire it out, just that cost is prohibitive and we chose not to.
    The quote for pavers was something like $65 per square foot, which is simply insane.
    I’ll do them myself eventually, but I’m procrastinating for now.

    Otherwise, it’s an old house so there’s always something.
    It’s now fairly well insulated, which means one of the next projects is to put in an air exhanger. Sigh.
    That’s not that big of an expense, but there’s been a few other big projects, so I’ve been procrastinating about that one too.

    • protist@mander.xyz
      link
      fedilink
      English
      arrow-up
      5
      ·
      21 days ago

      For pavers, it’s the excavation and grading that gets you. For my second paver project, I paid someone just to do the digging for me and it was the best money I ever spent.

  • protist@mander.xyz
    link
    fedilink
    English
    arrow-up
    7
    ·
    21 days ago

    I would like to buy an induction stove to replace my gas stove, but they spensive

    • Gnugit@aussie.zone
      link
      fedilink
      arrow-up
      8
      ·
      edit-2
      21 days ago

      Induction stove is amazing, I love mine. Before we got rid of our gas stove and bought it we used to use a bench top induction cooker from aldi for $40 aud. We still use it for hotpot on the table at times but it was always much better than the gas cooker.

    • bizarroland@lemmy.world
      link
      fedilink
      English
      arrow-up
      4
      ·
      21 days ago

      I had to replace mine two years ago. I want to say it was sixteen hundred dollars?

      My house came with an induction stove, and I really liked it. And so when it went bad, I got a replacement. My only suggestion, if you decide to do that, is make sure that your induction stove uses knobs or buttons and not a touch screen.

      Not that it’s a huge deal, but to turn it on you have to hit either the high button or the low button, and then press up or down repeatedly to get it to the right setting, and since I always want to cook somewhere in the middle, it’s like five, sporadic, not very efficient touchscreen button presses to get the stove turned on for each eye.

      It only adds like three seconds of annoyance to each day that I cook with the stovetop, but that’s still three seconds every single day, that I’m sitting there tap, tap, tap, tap, tapping, gently rapping to get the stove turned on.

      • Gnugit@aussie.zone
        link
        fedilink
        arrow-up
        3
        ·
        21 days ago

        Mine is meile with touchscreen and its very efficient. I would recommend touchscreen because the cleaning is amazing too, just one wipe over and it’s done.

      • threelonmusketeers@sh.itjust.works
        link
        fedilink
        English
        arrow-up
        1
        ·
        20 days ago

        that’s still three seconds every single day, that I’m sitting there tap, tap, tap, tap, tapping, gently rapping to get the stove turned on.

        Quoth bizarroland: “Nevermore.”

  • Gnugit@aussie.zone
    link
    fedilink
    arrow-up
    3
    ·
    21 days ago

    I would like to pay for a professional painter to paint my house inside and out as well as seal my roof tiles.

  • Pipster@lemmy.blahaj.zone
    link
    fedilink
    English
    arrow-up
    3
    ·
    21 days ago

    Heating. I have an old hot hot air system that measures temperature in ‘comfort levels’ rather than temp and apparently it doesn’t work with any smart thermostat systems…

    • SwizzleStick@lemmy.zip
      cake
      link
      fedilink
      English
      arrow-up
      2
      ·
      21 days ago

      How does it sense demand?

      We have an older system here wired to an old thermostat that uses a bimetallic strip to click on/off.

      Putting a shelly relay in parallel with it was trivial.

      • Pipster@lemmy.blahaj.zone
        link
        fedilink
        English
        arrow-up
        2
        ·
        21 days ago

        It has a thermostat with a strip that clicks but that doesn’t seem to be the only way that it decides to do stuff. I don’t want to keep it either way, not many people service it, its massive and takes up a ton of room in my kitchen, its loud and the heat isnt retained.

  • neidu3@sh.itjust.works
    link
    fedilink
    English
    arrow-up
    2
    ·
    edit-2
    21 days ago

    I don’t need to, but my kitchen should really be remodeled. It’s on the list. Also, I have some basement space that I should turn into livable space. Not sure which comes first.

  • Aussiemandeus@aussie.zone
    link
    fedilink
    arrow-up
    2
    ·
    21 days ago

    The fan in the computer room, (only 3 bed rooms, one for the son, one for the computers one for the missus and i) the bearings flogged out it makes a horrible noise and drives me mad when it’s on.

    Also I looked inside the fuse box and it’s scary looking and not up to regulations.

  • GissaMittJobb@lemmy.ml
    link
    fedilink
    arrow-up
    2
    ·
    edit-2
    20 days ago

    I truly am privileged enough to be able to say: nothing at all.

    I’m considering getting a new door that would be more secure against breaking in - not that I’ve ever heard anyone have that problem - and fire.

    It’s not quite a question of having enough money though, I’m mostly just reluctant to start the process. Also, I have a door which works alright already, so it’s not strictly speaking urgent.